Cabling Worksheet - IBM 8677 - BladeCenter Rack-mountable - Power Supply Planning And Installation Manual

Cabling worksheet

This worksheet is used to plan for the external network cables to attach the
Management module, Ethernet switch modules, and, if present, Fibre Channel
switch modules to external networks. Fill out one worksheet for each BladeCenter
unit.
On this worksheet record:
Table 17. Cabling worksheet
BladeCenter number: ___
Location in rack (1 through 6): ___
Rack number and location: ______________________________
Component
Ethernet switch module 1
10/100/1000 Mbps
Ethernet switch module 2
(10/100/1000 Mbps)
Management module (10/100
Mbps)
Fibre Channel switch module 1
Fibre Channel switch module 2
92
BladeCenter Type 8677: Planning and Installation Guide
The BladeCenter number (1 through 6)
The BladeCenter location in the rack (1 through 6)
The rack number and location
The From port: and To: connections. See Table 18 on page 93 for details on
cable media types and distances.
From port:
1
2
3
4
1
2
3
4
1
2
1
2
1
2
To: