Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 28

Getting Started
Introducing Components of the SPA9000 Voice System
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
SLM224P Front Panel
LED/Port
SYSTEM
LINK/ACT (1-24)
POE (1-6, 13-18)
100M (7-12, 19-24)
LINK/ACT (G1-G2)
GIGABIT (G1-G2)
RESET
Description
•
Green: Power is being supplied to the switch.
•
Solid Amber: The switch is performing the Power-On
Self Test (POST).
•
Green: The switch has a functional 10/100 Mbps
network link through the corresponding port with an
attached device.
•
Flashing: The switch is actively sending or receiving data
over the corresponding port.
•
Flashing Amber: Power is being supplied to an attached
powered device (PD) on the corresponding port (1
through 6, 13 through 18).
•
Amber: The switch has a functional 100 Mbps
connection on the corresponding port (7 through 12, 19
through 24) with an attached device.
•
Green: Lights up to indicate a functional 10/100/1000
Mbps network link through the corresponding port (G1
through G2) with an attached device.
•
Flashing Green: The switch is actively sending or
receiving data over the corresponding port.
•
Amber: The switch has a functional 1000 Mbps
connection on the corresponding port with an attached
device.
•
To reboot the switch, press and hold the Reset button for
approximately five seconds.
•
To reset the Switch settings to the factory defaults,
press and hold the Reset Button for approximately ten
seconds.
1
26