Advertisement
DIMENSIONAL DRAWING
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE
(PI ANGLE).
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE
(NUT PLATE).
SYMBOL INDICATES CENTER OF BALANCE
24.63
GRILLE PARTIALLY SHOWN
FRONT
(1.50)
C L
33.00
ACCESS
PANELS
INPUT
BACK
(12.29)
10.09
C L
A
11.00
A
18.67
30°
30°
133 (0)
TOP/BOTTOM
5/10/01
16.56
509133 (0)
SIDE VIEW (VIEW A-A)
5/10/01
DIMENSIONS APPLY TO BOTH SIDES
Manufacturing tolerances are +/- 0.13 and +/- 1°
Weights
Net Weight 169
Shipping Weight 184
One Main Street, Whitinsville, MA 01588
EAW products are continually improved. All specifications are therefore subject to change without notice.
36.00
4.00
18.88
L C
5.00
23.00
16.00
4.00
4.63
C
L
32.10
pounds
kilograms
76.0
83.7
508 234 6158
Toll Free 800 992 5013
SPECIFICATIONS AS690e
A & E SPECIFICATIONS
The bi-amplified or tri-amplified 3-way full range loudspeaker
system shall incorporate 2x 12-in LF vented transducers, a
horn-loaded 10-in MF cone with Radial Phase Plug™ and a
1.4-in exit/2.5-in voice coil HF neodymium compression driver.
The LF drivers shall be mounted in slanted baffles and sepa-
rated vertically. The MF driver shall be loaded into a midrange
horn constructed of 1/8-in birch plywood backed with high
density polyurethane foam. The HF driver shall be loaded on
a constant directivity horn with a nominal coverage pattern
of 90° (h) x 45° (v). An internal passive filter network shall
provide fourth order acoustical crossover and system equal-
ization between the MF and HF subsystems.
System frequency response shall vary no more than ±3 dB
from 67 Hz to 15 kHz measured on axis. The mid/high section
shall produce a Sound Pressure Level (SPL) of 107 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 139 dB SPL on axis at
1 meter. The low frequency section shall produce a Sound
Pressure Level (SPL) of 102 dB SPL on axis at 1 meter with a
power input of 1 Watt, and shall be capable of producing a
peak output of 137 dB SPL on axis at 1 meter. The mid fre-
quency section shall produce a Sound Pressure Level (SPL) of
109 dB SPL on axis at 1 meter with a power input of 1 Watt,
and shall be capable of producing a peak output of 141 dB SPL
on axis at 1 meter. The high frequency section shall produce
a Sound Pressure Level (SPL) of 109 dB SPL on axis at 1 meter
with a power input of 1 Watt, and shall be capable of pro-
ducing a peak output of 136 dB SPL on axis at 1 meter. The
mid/high section shall handle 450 Watts of amplifier power
(continuous) and shall have a nominal impedance of 8 Ohms.
The low frequency section shall handle 800 Watts of amplifi-
er power (continuous) and shall have a nominal impedance of
4 Ohms. The mid frequency section shall handle 400 Watts of
amplifier power (continuous) and shall have a nominal
impedance of 8 Ohms. The high frequency section shall han-
dle 125 Watts of amplifier power (continuous) and shall have
a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of multi-ply, void-free, cross-grain-lami-
nated, exterior grade, Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear-resist-
ant textured black paint. Input connectors shall be 2x 6-
Contact terminal barrier strips, jumpers used for powering
configuration. Eighteen (18) 3/8"-16 threaded mounting/sus-
pension points (4 each on top, bottom and sides, 2 on back)
shall be provided. The front of the loudspeaker shall be cov-
ered with a powder coated perforated steel grille.
The bi-amplified or tri-amplified 3-way full range loudspeaker
shall be the EAW model AS690e.
FAX 508 234 8251
AS690e/2 pp
info@eaw.com
www.eaw.com
October 2001
Printed in USA
Advertisement
