Installing The System Fan; Removing The Psu Card - Dell Precision T5600 Owner's Manual

CAUTION: Using excessive force may damage the grommets.
15. Remove the system fans from the system fan assembly.
Figure 15.

Installing the System Fan

1. Place the fans in the fan assembly and attach the grommets.
2. Place the fan assembly in the chassis.
3. Install the screws to secure the fan assembly to the chassis.
4. Connect the system fan cables to their connectors on the system board.
5. Route the system fan cables out of the opening in the system fan module in the direction of the system board.
6. Place the air baffle in its slot in the computer and insert the latches.
7. Install the screws that secure the drive bay.
8. Replace the metal plate and install the screw that secures metal plate to the system fan.
9. Route and connect the system board cable to its connector.
10. Install:
a) optical drive
b) hard drive
c) air tunnel (if equipped)
d) PCI card
e) intrusion switch
f) cover
11. Follow the procedures in

Removing the PSU Card

1. Follow the procedures in
2. Remove the cover.
3. Slide the baffle cover from its slot towards the front.
After Working Inside Your Computer .
Before Working On Your Computer .
25