Dell Precision T5600 Owner's Manual page 44

Option
Computrace
Chassis Intrusion
Admin Setup Lockout
Table 7. Power Management
Option
AC Recovery
Auto On Time
Deep Sleep Control
Fan Control Override
Wake on LAN
44
Description
Default Setting: Enable CPU XD Support
Allows you to activate or disable the optional Computrace software. The options
are:
• Deactivate (Default Setting)
• Disable
• Activate
NOTE: The Activate and Disable options will permanently activate or disable
the feature and no further changes will be allowed.
This option is disabled by default.
Allows you to prevent users from entering Setup when an Administrator password
is set.
Default Setting: Disabled
Description
Specifies how the computer will respond when AC power is applied after a AC
power loss. You can set the AC Recovery to:
• Power Off (Default Setting)
• Power On
• Last Power State
Allows you to set the time at which the computer must turn on automatically. The
options are:
• Disabled (Default Setting)
• Every Day
• Weekdays
Allows you to define the controls when Deep Sleep is enabled.
• Disabled (Default Setting)
• Enabled in S5 only
• Enabled in S4 and S5
This option is disabled by default.
Controls the speed of the system fan. The default setting is set to Auto.
This option allows the computer to power up from the off state when triggered by a
special LAN signal. Wake-up from the Standby state is unaffected by this setting
and must be enabled in the operating system. This feature only works when the
computer is connected to AC power supply.
• Disabled - Does not allow the system to power on by special LAN signals
when it receives a wake-up signal from the LAN or wireless LAN.
• LAN Only - Allows the system to be powered on by special LAN signals.
This option is disabled by default.