Ricoh Priport DX 4640PD Operating Instructions Manual page 104

Printing Functions
Class mode
Preparation
Before using this function, make
sure that the tape dispenser switch
is turned on.
A
Place one original on the exposure
glass or in the optional ARDF.
B
Press [Class Settings].
3
C
Press [Class].
D
Enter the number of prints and
classes per pattern using the num-
ber keys, and then press the {q}
key.
Registering a program
You can also register frequently
used settings in machine memory.
A Press [Program / Recall].
B Press [Program].
C Press the program number you
want to store.
Note
❒ Program numbers displayed
with m next to them already
have settings.
92
D Enter the program name using
the letter keys on the display
panel.
You can enter up to 40 characters.
Reference
For details about entering
characters, see p.211 "Enter-
ing Text" .
E Press [OK].
When the settings are success-
fully stored, the m indicator
followed by the program num-
ber and program name will be
displayed. After a while, the
screen reverts back to the initial
display.
Recalling a Program
You can recall the program if you
have registered it already.
A Press [Program / Recall].
B Press [Recall].
The stored settings are dis-
played.
Note
❒ Program numbers displayed
with m next to them already
have settings.
C Press the number of the pro-
gram you want to recall.
E
Press [OK] twice.
F
Press the {Start} key.
AJK408S