Linksys QuickVPN - PC User Manual page 13

Chapter 3
3. Connect your cable or DSL modem's Ethernet
cable to the Router's Internet port.
If you are using the DMZ/Internet port, then connect
an Ethernet cable to the DMZ/Internet port. Connect
the other end to a network device, such as a modem
or public server.
Connect to the Internet Port
4. Power on the cable or DSL modem. If you have a
network device connected to the DMZ/Internet port,
power on the network device.
5. Connect the included power cord to the Router's
Power port, and then plug the power cord into an
electrical outlet.
Connect the Power
6. The System LED on the front panel will light up as soon
as the power adapter is connected properly.
7. Power on your computers and other network devices.
10/100 8-Port VPN Router
Installation
6