NEC V421-2 Installation Manual

V421-2 Installation Guide
42" LCD Display
Contents
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, Top & Right Side
Rear & Bottom
Display Dimensions w/Included Speakers
Table Top Stand Dimensions
Optional Wall Mount Dimensions (WMK-3257)
Input Panel
Control Codes

Product Description

Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
•
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
•
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
•
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
•

Tilt Angle and Rotation

Below are the maximum angles that the monitor can be tilted in the landscape position only.
www.necdisplay.com
LCD Display
1920 x 1080
16:9
Class B
160W (max)
545.94 BTU/hour
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Screen Surface:
Dimensions without stand: 40.3"(W) x 26.2"(H) x 5.2"(D)
Dimensions with stand:
Weight without stand:
Weight with stand:
V421-2
Rev 1.0
Anti-Reflective
40.3"(W) x 25.6"(H) x 13.0"(D)
45.2 lbs
49.2 lbs
Page 1 of 9