HP 5600 - Compaq TFT RKM User Manual page 22

7. Place the tray back into the rack.
a. Slide the locking bar (1) to unlock.
IMPORTANT: If the TFT5600 RKM is not properly aligned with other rack-mounted
devices when installed, cosmetic damage to the top of the unit can occur due to
interference. Leave protective sheet on the unit while adjusting.
b. Carefully push the tray (2) into the rack.
IMPORTANT: If the TFT5600 RKM interferes with the other rack-mounted devices,
above or below, loosen the M-6 screws on the mounting rails to make appropriate
adjustments (See Figure 2-2).
Figure 2-7: Placing tray back into the rack
HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide
Installation
2-7