Download Print this page

HP 5600 - Compaq TFT RKM User Manual: Power Cord Set Requirements; General Requirements

Tft5600 rackmount keyboard and monitor (rkm) user guide.
Hide thumbs

Advertisement

The power cord set meets the requirements for use in the country where you
purchased your equipment. The voltage selection switch allows you to select the
appropriate line voltage for your server.
Power cord sets for use in other countries must meet the requirements of the country
where you use the server. For more information on power cord set requirements,
contact your HP authorized reseller.

General Requirements

The requirements listed below are applicable to all countries:
The length of the power cord must be at least 6.0 feet (1.8 m) and a maximum of
12 feet (3.7 m).
The power cord set must be approved by an acceptable accredited agency
responsible for evaluation in the country where the power cord will be used.
The power cord set must have a minimum current capacity and nominal voltage
rating of 10A/125 volts AC, or 10A/250 volts AC, as required by each country's
power system.
The appliance coupler must meet the mechanical configuration of an
EN60320/IEC 320 Standard Sheet C5 Connector, for mating with the appliance
outlet on the computer.
HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide

Power Cord Set Requirements

C
C-1

Advertisement

   Related Manuals for HP 5600 - Compaq TFT RKM

This manual also for:

Tft5600

Comments to this Manuals

Symbols: 0
Latest comments: