Read Disc Structure Command; Read Header Command; Read Toc/Pma/Atip Command - Pioneer DVR-710 Command Reference Manual

4.19 READ DISC STRUCTURE Command

Following Format codes are supported.
Table 30 - Format Code for READ DISC STRUCTURE command
Format Returned Data
Code
00h Physical
01h Copyright
02h Disc Key
03h BCA
04h Manufacturer's
05h CGMS, CPM
06h Media Identifier
07h Media Key Block
08h Disc Definition
Structure
09h DVD-RAM Status
Information
0Ah Spare Area
Information
0Bh Recording Type
Information
0Ch RMD in last Border-
out
0Dh RMD
0Eh Pre-recorded
information
0Fh Unique Disc Identifier
10h Physical in the Lead-
in
11h ADIP Information
20h Layer Boundary
Information
21h Shifted Middle Area
Start Address
22h Regular Interval Layer
Jump Size
23h Manual Layer Jump
Address
24h Remapping Address
30h Disc Control Blocks
C0h Write Protection
FFh Structure List
If the DVD-RAM Recording has not been supported, the Format Code 08h to 0Bh are not supported.
If the Layer Jump Recording has not been supported, the Format Code 21h to 24h are not supported.

4.20 READ HEADER Command

This command is defined in a legacy specification (MMC-2 Revision 10a).

4.21 READ TOC/PMA/ATIP Command

The ADR/Control field for DVD media is always set to 14h.
R11 Series Drive Command Reference Manual Version 1.00
Returns information in the DVD Lead-in area
Returns the Copyright information from DVD Lead-in
Returns the Disc Key obfuscated by using a Bus Key on the DVD-
ROM media
Returns the BCA/NBCA information on DVD media
Returns the Disc Manufacturing information from DVD Lead-in
Returns CGMS, CPM information from specified sector
Returns Media Identifier protected by using Bus Key
Returns Media Key Block protected by using Bus Key
Returns the Defect Controls of the DVD-RAM media Lead-in
Returns DVD-RAM Status Information that can do a recording
Returns Number of Unused Primary Spare Blocks, Number of
Unused Supplementary Spare Blocks and Number of Allocated
Supplementary Spare Blocks
Returns Recording Type Information, which of real-time data and
general data the sector includes
Returns the Field of RMD in last Border-out of the DVD-R/-RW disc
Returns RMD sectors which recorded in RMA of the DVD-R/-RW disc
Returns Pre-recorded information in Lead-in of the DVD-R/-RW disc
Returns Unique Disc Identifier of the DVD-R/-RW disc
Returns Physical format information of Control Data zone in the
Lead-in
Returns ADIP Information of +R/+RW/+R DL disc
Returns Layer Boundary information
Returns the Start Logical Block Address of the Shifted Middle Area
on Layer 0
Returns the Interval Size of Regular Interval Layer Jump
Returns the Start Logical Block Address of the Manual Layer Jump
Returns one Remapping Information of the specified anchor point
Returns the Disc Control Block identified by the Content Descriptor
Return the Write Protection Status
Returns a list of DVD structure present in the specified Layer
Page 47
Description