Blank Command - Pioneer DVR-710 Command Reference Manual

4.1 BLANK Command

This command is valid for CD-RW and DVD-RW media.
The Immed bit is supported.
The READ DISC INFORMATION Command, the READ TRACK/RZONE INFORMATION Command and the
TEST UNIT READY Command is used to detect completion of the blank operation. While blank operation is
performed by the BLANK Command that the Immed bit is set to one, the drive terminates these
commands with the Check Condition status, LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
(2/04/07).
The drive supports following Blanking Type for CD-RW and DVD-RW media.
Table 2 - Blank Type
Code Name
000b Blank the disc
001b Minimally blank the disc
010b Blank a Track
011b Unreserve a Track/RZone
100b Blank a Track/RZone Tail
101b Unclose the last Session/Border
110b Erase Session/Border
R11 Series Drive Command Reference Manual Version 1.00
CD-RW media DVD-RW media
yes
yes
no
no
yes
no
no
Page 9
yes
yes
-
no
no
no
no