Play Cd Command; Read (10), Read (12) Command; Read Buffer Command - Pioneer DVR-710 Command Reference Manual

Bit
7
Byte
34 (MSB)
35
36 - 59
60
61
62 (MSB)
63
The Maximum Read Speed Supported field does not reflect the maximum read speed for each medium
type and format. If no disc is mounted in the drive, the field is set to the same value as CD.
The Current Read Speed filed does not reflect the actual read speed. If no disc is mounted in the drive,
the field is set to the same value as CD.
The Maximum Write Speed Supported field is set to the same value of the Write Speed Descriptor #1 data
which is returned for the GET PERFORMANCE command.
The Current Write Speed filed is set to the same value of the Write Performance data which is returned for
the GET PERFORMANCE command.
The Number of Logical Unit Write Speed Performance Descriptor Tables and The Logical Unit Write Speed
Performance Descriptors #1 - #8 are set to the suitable values by using the same algorism as the GET
PERFORMANCE command.

4.13 PLAY CD Command

This command is defined in a legacy specification (MMC-2 Revision 10a).

4.14 READ (10), READ (12) Command

The RelAdr bit is not supported and must set to 0.
If the Streaming bit in the CDB of the READ (12) command is set to one, the FUA bit shall be set to zero.
The setting of the Streaming bit is no effect on the operation.

4.15 READ BUFFER Command

This command is used for checking the drive.
The specifications of this command are vendor unique.
R11 Series Drive Command Reference Manual Version 1.00
6 5 4
000000b
Write Speed Supported #1
Logical Unit Write Speed Performance Descriptors #2 - #7
Reserved = 00h
Reserved
000000b
Write Speed Supported #8
Page 45
3 2 1
Rotation Control #8
0
00b
(LSB)
00b
(LSB)