Clock Setup; Monitor Setup - Kenwood KVT-696 Instruction Manual

Clock Setup Monitor Setup
in the "Setup Touch
Menu" screen (page 61).
IT]
Moves to "Angle Control" screen.
[I]
Brightness Control
W
Contrast Control
@]
Black Level Adjustment
[Ii
Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesn't dim.
"SYNC: Turning the Dimmer function
On or Off when the vehicle light
control switch is turned On or Off.
You can adjust the position, picture quality and
the screen mode of the monitor.
D
Displaying the Monitor SETUP screen
• In this Screen Control screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the <Screen Control> (page 48).
o
Setup each item
Q
~
o
Setup the Clock
Touch • • • • • • • • in the "Setup
Menu" screen (page 61)
You can adjust the clock time.
D
Display the Clock Setup screen
IT]
Clock time display
[I]
Adjusts hours.
W
Adjusts minutes.
@]
Sets "00" minute.
Setup examples: 3:00 - 3:29 .. 3:00
3:30 - 3:59 .. 4:00
W
Sets the clock time in synchronization with
the time data sent from the navigation
system or the RDS station*.
(*RDS station: North American sales area
only)
When the synchronized mode is set, the
clock cannot be adjusted manually.
o
Adjust the clock time
[ill
Returns to the "Screen Adjust" screen.
m
Moves to "Mode Select 1" screen.
W
Monitor Angle Adjustment
[]] Forward/Backward Monitor Position
Adjustment
Nextpage~
English 73