Low Profile Diskette Drive - Compaq DL360 - ProLiant - Photon Maintenance And Service Manual

Proliant dl360 generation 2 server maintenance and service guide
Hide thumbs Also See for DL360 - ProLiant - Photon:
Table of Contents

Advertisement

Low Profile Diskette Drive

To remove the diskette (floppy) drive:
1. Power down the server. See "Powering Down the Server" in this chapter.
2. Remove the server from the rack. See "Removing the Server from the Rack" in this
chapter.
3. Remove the access panel. See "Server Access Panel" in this chapter.
4. To remove the diskette drive locking tab, turn the thumbscrew counterclockwise and
remove the tab
5. Push the diskette drive from the rear to release it from the backplane connector
pull the drive forward out of the chassis
Figure 2-7: Removing the diskette drive.
Compaq ProLiant DL360 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Maisto Part Number: 233831-001 Last Saved On: 12/12/01 3:47 PM
CAUTION: Do not operate the server without a diskette drive installed. Failure to install a
diskette drive can lead to improper cooling and may damage the system.
.

3
Removal and Replacement Procedures
.

1
2
and

2-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant dl360 generation 2

Table of Contents