Compaq DL360 - ProLiant - Photon Maintenance And Service Manual page 36

8. Loosen the retaining clip screw
the release latch
Figure 2-21: Sliding off the retaining clip
9. Press the release latch
assembly from the server internal power cord
Figure 2-22: Disconnecting the line filter from the server
internal power cord
Reverse steps 1 through 9 to replace the AC power cord and filter.
Compaq ProLiant DL360 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Maisto Part Number: 233831-001 Last Saved On: 12/12/01 3:47 PM
, with a screwdriver, and slide the retaining clip clear of


.

1
and pull the filter to disconnect the power cord and line filter


Removal and Replacement Procedures
2
.

2
1
2
2-25