Gem,Version 3.X; Creating A Gem Driver Pack - Epson Endeavor Vga Utilities Manual

GEM, Version 3.x
The table below lists the driver filenames for the resolutions
available for GEM.
GEM driver files
Filename
SDA600.VGA
SDA768.VGA
If you have not yet installed GEM, follow the instructions in
your GEM documentation to install it with the standard EGA
(IBM Enhanced Card and 16-Color Display) driver.
GEM requires that you install drivers from the root directory of
a diskette in drive A. To install the drivers for GEM, you'll need
to do the following:
Create a GEM driver pack
Install the drivers using the INSTALL program
Configure GEM for your new driver.

Creating a GEM Driver Pack

Follow these steps to create a GEM driver pack:
1. Insert a blank diskette in drive A.
2. Format the disk using the MS-DOS FORMAT command.
You'll see a prompt for the volume label.
3. Type the following volume label name and press
G E M D R I V R P K
22 VGA Utilities
Resolution
800X600
1024 x 768
: