Configuring Autoshade With Renderman - Epson Endeavor Vga Utilities Manual

Use an editor that can save files in ASCII format to edit the
4.
FASTACAD.BAT file. Change all occurrences of
DLDVGA.EXP to RCPANA.EXP. Also change any
occurrences of DLDVG256.EXP to RCPANAl .EXP.
5. Add the DLD software to your ACADDRV environment. For
example, if your AutoCAD is installed in the C:\ACAD
directory and the DLD386-VGA files are installed in
C:\ACAD386, type the following command and press
SET ACADDRV=C:\ACAD\DRV;C:
If you're using a batch file to start AutoCAD, also change the
SET command line in your batch file.
6. Configure your AutoCAD, version 12, by selecting
DLD386-VGA as your display device.

Configuring AutoShade with RenderMan

The first time you use AutoShade with a DLD386VGA driver,
you must follow these steps to change the display device
configuration:
1. Log onto the AutoShade program directory.
2. Type the following and press
program:
SHADE /R
3. Select P386 AutoDesk Device Interface as the display
driver.
4. Select P386 AutoDesk Device Interface as the
rendering driver.
\ACAD386;
to start the AutoShade
VGA Utilities 15