Using The Install Program - Epson Endeavor Vga Utilities Manual

Using the INSTALL Program

The INSTALL program on your Utility 1 diskette provides an
easy way to install the VGA drivers and utilities for your
MS-DOS based applications. You can choose to install of the
drivers at once or select individual sets of drivers to install.
Note
You do not need to use the INSTALL program on the
Utility 1 diskette to install the 0S/2 and Windows drivers.
See "IBM OS/2, Version 2.0" on page 25 or "Microsoft
Windows, Version 3.0" on page 31 for installation
instructions for these drivers.
Follow these steps to run INSTALL:
1. Insert the Utility 1 diskette in drive A.
Type
2.
A:
3. Type the following and press
program:
INSTALL
You see the Cirrus Logic copyright screen.
4. Press
the drive where you want to install the drivers.
5. Press
to move the cursor to the drive you want to select and press
6 VGA Utilities
and press
. The INSTALL program prompts you to select
again to accept the default or use the arrow keys
to log onto drive A.
to start the installation