Table of Contents
Advertisement
5.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports either
HD Audio or legacy AC'97 audio standard.
P8H61-M LX2
P8H61-M LX2 Front panel audio connector
•
•
6.
Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
P8H61-M LX2
P8H61-M LX2 Serial port (COM1) connector
The COM module is purchased separately.
3-6
E6787 V6-P8H61ELX Manual.indb 6
AAFP
PIN 1
HD-audio-compliant
pin definition
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
By default, this connector is set to HD Audio. If you want to connect a High Definition
front panel audio module to this connector, set the HD Audio Controller item in the
BIOS to [Enabled]. See section "4.4.6 Onboard Devices Configuration" for details.
PIN 1
Legacy AC'97
compliant definition
COM1
PIN 1
Chapter 3: Motherboard info
7/28/11 10:43:59 AM
Advertisement
Table of Contents
