Table of Contents
Advertisement
To reinstall the motherboard:
1.
Firmly hold the motherboard by
the sides and insert it into the
chassis.
2.
Carefully adjust the motherboard
until the rear panel ports fit in
place.
3.
Use a Phillips (cross) screwdriver to secure the motherboard with 10
screws in the holes as shown in the illustration.
4.
Reconnect all the required cables to the motherboard. See section
"2.7 Cable connections" for illustration.
5.
Reinstall all the devices that you have previously removed.
2 - 2 6
2 - 2 6
2 - 2 6
2 - 2 6
2 - 2 6
K8N-DRE
¤
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
Advertisement
Table of Contents
