Optical Drive - Asus RS161-E2 - 0 MB RAM User Manual

1u rackmount barebone server
Table of Contents

Advertisement

2.9.5
2.9.5
2.9.5

Optical drive

Optical drive
Optical drive
2.9.5
2.9.5
Optical drive
Optical drive
To uninstall the optical drive:
1.
Disconnect the power and
signal cables connected to the
rear of the optical drive.
3.
Pull out half of the drive tray
to remove the tray bezel.
Do not apply too much force when removing the bezel. Too much force
may break the drive tray!
5.
Replace the drive tray.
A S U S R S 1 6 1 - E 2 / P A 2
A S U S R S 1 6 1 - E 2 / P A 2
A S U S R S 1 6 1 - E 2 / P A 2
A S U S R S 1 6 1 - E 2 / P A 2
A S U S R S 1 6 1 - E 2 / P A 2
2.
Insert the optical drive
emergency eject pin to the
emergency eject pin hole until
the drive tray ejects.
4.
Pull the center of the bezel
outward (A), then lift the sides
(B) to remove.
2 - 2 3
2 - 2 3
2 - 2 3
2 - 2 3
2 - 2 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs161-e4 - 0 mb ramRs161-e2/pa2

Table of Contents