LG LWHD2400HR Owner's Manual page 14

Installation
1. Open the window; Mark a line on the center of
the window stool be_een the _de window stop
moldings.
L_sely a_ach the sill bracket to the support
bracket using the carriage _t and the Ioick nut:,
2. Attach, the silll bracket to the window sil_using
thie _ews (Type B)..
Carefulty place the cabinet on the window stool
and align the _nter mark on the bottom front
with the center line marked window st_L
3 Using Me M-_rew and the lock nut, attach the
support bracket to the ,cabinet track hole, Use
the first track ho.leafter the sBf bracket on Me
outer ed_ of the window aB. Tighten the
carriage bo._and the _k nut..Be sure Me
cabinet slants ou_ard,
Do not drill a hole in the _ttom pare The unff is.
designed to o_rate with approxirr_tely 1/2" o_
water in bottom pan..
4 Purl the bottom window sash down behind the,
Top relainer bar until they meet.
1, Do not pul! the window _sh down so flgNly
that the movement o_ Frame curtain is
restricted.. A_ach the _binet to the window
slool by driving the screws !_jpe B) through
the cabinet into window st_L
2..The cabinet _,ou_d I_ iinsta_d witih a very
s_ight tilt downward t_ard Me outside.
I Sill _ I
Bra Supped
, _._/ _I_J'----II III Bracket
(M-oScrew) [J,!'"
Cabinet_.
Track hole
Machi#e_rew(Typ÷ D}
bck nut
sill
and bracket
Window _sh
N
retainer bar
Frame curtain
Foam PE
track
Front Angle
14 Room Aft Co_,ditioner