Signal Menu; 3D Y/C Filter - Panasonic TH-85PF12W Operating Instructions Manual

SIGNAL menu

Note:
"SIGNAL" setup menu displays a different setting condition for each input signal.
1
Press to display the SET UP menu.
Press to select the "SIGNAL".
2
Press to display the SIGNAL menu.
Press to select the menu to adjust.
3
Press to adjust the menu.
4
Press to exit from adjust mode.

3D Y/C FILTER

Select "SIGNAL" from the "SET UP" menu during VIDEO (S VIDEO) input signal mode.
("SIGNAL [VIDEO]" menu is displayed.)
Press to select the "3D Y/C FILTER (NTSC)".
Press to set ON / OFF.
Note:
When ON, this setting only affects NTSC input signals.
– For NTSC AV images
SET UP for Input Signals
For VIDEO (S VIDEO)
[ VIDEO ]
SIGNAL
3D Y/C FILTER (NTSC) ON
COLOR SYSTEM AUTO
3 : 2 PULLDOWN OFF
Panasonic AUTO (4 : 3) 4:3
REFRESH RATE 100 Hz
NOISE REDUCTION
OFF
For COMPONENT
[ COMPONENT ]
SIGNAL
3 : 2 PULLDOWN
OFF
XGA MODE
AUTO
REFRESH RATE 100 Hz
NOISE REDUCTION OFF
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
SIGNAL FORMAT 1280×1024/60
3D Y/C FILTER (NTSC)
SET UP 1/2
SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE OFF
STANDBY SAVE
OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
Press ACTION ( ) button
For RGB
[ RGB ]
SIGNAL
SYNC AUTO
3 : 2 PULLDOWN OFF
XGA MODE AUTO
REFRESH RATE 100 Hz
NOISE REDUCTION OFF
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
SIGNAL FORMAT 1280×1024/60
For Digital
[ Digital ]
SIGNAL
3 : 2 PULLDOWN
OFF
REFRESH RATE
100 Hz
NOISE REDUCTION OFF
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
DOT CLOCK FREQ. 108.0 MHz
SIGNAL FORMAT 1280×1024/60
ON
51