Setup Of Screensaver Time - Panasonic TH-85PF12W Operating Instructions Manual

SCREENSAVER (For preventing image retention)

Setup of SCREENSAVER Time

After selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become available
for selection and the Operating Time may be set. (Time cannot be set when "MODE" is "ON" or "OFF".)
Press to select START TIME / FINISH TIME (when TIME OF
DAY is selected).
Press to select SHOW DURATION / SAVER DURATION
(when INTERVAL is selected).
Press to select SCREENSAVER DURATION (when
STANDBY AFTER SCR SAVER is selected).
Press to setup.
Notes:
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
• "SCREENSAVER DURATION" of the "STANDBY AFTER SCR SAVER" can
be set from 0:00 to 23:59. When this is set to "0:00", "STANDBY AFTER
SCR SAVER" will not be activated.
Note: Timer function will not work unless "PRESENT TIME OF DAY" is set.
38
button: Forward
button: Back
SCREENSAVER
PRESENT TIME OF DAY 15:00
START
FUNCTION SCROLLING BAR ONLY
TIME OF DAY
MODE
6:15
START TIME
FINISH TIME 12:30
SCREENSAVER
PRESENT TIME OF DAY 15:00
START
FUNCTION SCROLLING BAR ONLY
INTERVAL
MODE
12:00
SHOW DURATION
SAVER DURATION 3:00
SCREENSAVER
PRESENT TIME OF DAY 15:00
START
FUNCTION SCROLLING BAR ONLY
STANDBY AFTER SCR SAVER
MODE
6:15
SCREENSAVER DURATION