Installing The Display Assembly; Removing The Display-Hinge Cover - Dell Vostro 3460 Owner's Manual

Installing the Display Assembly

1. Align the display assembly to its location on the computer base.
2. Tighten the screws to secure the display assembly to the chassis.
3. Install the:
a) palmrest
b) keyboard
c) battery
4. Follow the procedures in

Removing the Display-Hinge Cover

1. Follow the procedures in
2. Remove the:
a) battery
b) base cover
c) memory
d) optical drive
e) hard drive
f) keyboard
g) palmrest
h) WLAN card
i) display assembly
3. Remove the screws that secure the display-hinge cover to the computer.
After Working Inside Your Computer .
Before Working On Your Computer .
25