Table of Contents
Advertisement
User's manual OnCourse Navigator 5
2.2.1
Mounting and connecting the Pocket PC
Connecting the
Pocket PC...
- 18 -
Caution: The mounted holder must not impede the driver's
attention on the traffic.
1. Attach the cradle of the Pocket PC to the swan-neck mount.
Note: Take note of the caption on the swan-neck mount. The
arrow with the caption close must show in snap-on direction.
The connection must snap on audibly.
2. Place the suction cup on the windscreen. Press the lever
firmly to the windscreen before switching it.
3. Put the Pocket PC into the cradle. Make sure that it is held
safely!
4. Plug the adapter into the socket at the bottom of the
Pocket PC.
Installing the hardware
Advertisement
Table of Contents
