Table of Contents
Advertisement
User's manual OnCourse Navigator 5
2.1
Installing the software
Install the software
on your PDA...
2.1.1
Restoring the files of the storage card
Restore the files of
the storage card...
- 10 -
You may find a detailed description of the software installation
procedure in the enclosed short manual.
On your OnCourse Navigator DVD 1, you will find the
Installer-Tool which guides you through the installation and
map transmitting procedures.
Note: ActiveSync must be installed on your PC and on your
Pocket PC. For detailed information, please refer to the manual of
your Pocket PC.
Proceed as follows:
1. Connect your PC and your Pocket PC via ActiveSync.
2. Insert the OnCourse Navigator DVD 1 into your DVD drive.
3. The Installer-Tool starts automatically. Follow the
instructions on the screen.
Note: In case the Installer-Tool does not start automatically,
start the Windows-Explorer. Select the directory of your DVD
drive and double-click the "Setup.exe" file.
1. Connect your PC and your Pocket PC via ActiveSync.
2. Insert the OnCourse Navigator DVD 1 into your DVD drive.
3. The Installer-Tool starts automatically. Follow the
instructions on the screen.
Note: In case the Installer-Tool does not start automatically,
start the Windows-Explorer. Select the directory of your DVD
drive and double-click the "Setup.exe" file.
Installing the software
Advertisement
Table of Contents
Need help?
Do you have a question about the OnCourse Navigator 5 and is the answer not in the manual?