Signpost Information; Speed Limit - Easy PocketNAV.com OnCourse Navigator 5 User Manual

8.1.4

Signpost information

Signpost information
8.1.5

Speed limit

Speed control
Configuring OnCourse Navigator
On the S
IGNPOST INFORMATION
following modifications:
The Show traffic signs command indicates whether signposts
indicating exits from Interstates or highways are currently being
displayed or not.
Tap the Show traffic signs command to toggle between On and
Off mode.
The new mode is now indicated on the button.
Note: This information can only be displayed when it is contained
in the cartographic material.
On the S screen, you may effect the following
PEED LIMIT
modifications:
Setting
Show traffic signs
Warning in urban
areas
Warning outside
urban areas
Note: This information can only be displayed when it is contained
in the cartographic material.
Caution: Information contained in the cartographic material can
be wrong, e.g. due to road works.
Traffic situation and road traffic regulations are absolutely prior
to the information given by the navigation system.
User's manual OnCourse Navigator 5
screen, you may effect the
Significance
This command indicates whether signposts
indicating speed limits are currently being
displayed or not.
Tap the Show traffic signs command and
select whether speed limits should be
displayed
Always
On speeding only or
Never.
This command indicates from how much
speeding on you want to be warned when
driving within built-up areas.
Tap the Warning in urban areas
command to select another value or to set
it to Never.
This command indicates from how much
speeding on you want to be warned when
driving outside built-up areas.
Tap the Warning outside urban areas
command to select another value or to set
it to Never.
- 117 -