User's manual OnCourse Navigator 5
8.1.3
Route information
Route info
- 116 -
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 38.
On the R
OUTE INFORMATION
modifications:
Element
ETA at final dest.
Time to final dest.
Dist. to final dest.
ETA at next dest.
Time to next dest.
Dist. to next dest.
screen, you may effect the following
Signification
ETA (Estimated time of arrival) at the final
destination.
Remaining time to the final destination
(estimated).
Remaining distance to the final destination
(estimated).
Tap the respective command buttons to
display (On) or not (Off) the respective
information on the map.
All information displayed below refers to
the final destination. .
ETA (Estimated time of arrival) at the next
route point.
Remaining time to the next route point
(estimated).
Remaining distance to the next route point
(estimated).
Tap the respective command buttons to
display (On) or not (Off) the respective
information on the map.
All information displayed below refers to
the next route point.
This section is only available if you have
indicated more than one destination to
navigate to
Settings
Need help?
Do you have a question about the OnCourse Navigator 5 and is the answer not in the manual?