Reattaching the door
1 Holding the door in both hands, squarely insert
the "T" post on the back of the hinge into the "T"
slot on the front panel and lower it to align the
"T" POST ON
2 While supporting the door, install the upper pan
head screw ﬁ rst and then the lower one.
Correctly installed hinge screws will press hinge ﬂ ush
to front panel. Any gap between hinge and front panel
will cause misalignment of strike to latch.
3 Close the door and test operation of hinge, strike
"T" SLOT IN