Audio Settings; Dual Mono - Sony STR-DA5800ES Operating Instructions Manual

Multi channel av receiver
Hide thumbs Also See for STR-DA5800ES:
Table of Contents

Advertisement

Available languages

Available languages

Audio Settings

You can adjust settings for the audio to suit
your preference.
Digital Legato Linear (D.L.L.)
The D.L.L. function is Sony proprietary
technology that allows low quality digital
audio signals and analog audio signals to be
played back with high quality sound.
x Off
x Auto 1
This function is available for lossy
compression audio formats and analog audio
signals.
x Auto 2
This function is available for Linear PCM
signals, as well as lossy compression audio
formats and analog audio signals.
Notes
• This function may not work, depending on the
content via a USB device, or a home network.
• This function works when "A.F.D. Auto" is
selected. However, this function does not work in
the following cases.
– Linear PCM signals with a sampling frequency
of other than 44.1 kHz are being received.
– Dolby Digital Plus, Dolby Digital EX, Dolby
TrueHD, DTS 96/24, DTS-ES Matrix 6.1, DTS-
HD Master Audio, or DTS-HD High Resolution
Audio signals are being received.
Sound Optimizer
Lets you set the sound optimizer function
(page 67).
x Off
x Low
x Normal
Equalizer
Lets you adjust the bass, middle*, and treble
level for each speaker (page 67).
(* for the center speaker only.)
LFE Time Alignment
The LFE Time Alignment function allows you
to shift the output timing of the LFE channel
by –20ms (delay) to +20ms (forward) for other
channels. This function is effective for
adjusting content in which the LFE channel
phase has a gap from that of other channels.
Note
• This function does not work in the following cases.
– "MULTI IN" is selected.
– "2ch Analog Direct" is being used.
Subwoofer Muting
Lets you prevent signals from being output via
the PRE OUT SUBWOOFER jacks.
x Off
The PRE OUT SUBWOOFER jacks output
signals.
x On
The PRE OUT SUBWOOFER jacks do not
output signals.
Note
• This function does not work in the following cases.
– Headphones are connected.
– "2ch Analog Direct" is selected.
– "2ch Stereo" is selected.
– A speaker pattern without a subwoofer is
selected.

Dual Mono

Lets you select the language you want when
you listen to the dual audio of a digital
broadcast when available. This feature only
functions for Dolby Digital sources.
continued
107
US

Advertisement

Chapters

Table of Contents
loading

Table of Contents