Specifications - Sony STR-DA1800ES Operating Instructions Manual

Specifications

AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
1)2)
POWER OUTPUT
Rated Power Output at Stereo Mode
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
100 W + 100 W
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
150 W per channel
1)
Measured under the following conditions:
Area Power requirements
USA, Canada 120 V AC, 60 Hz
2)
Reference power output for front, center,
surround, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Analog 10 Hz – 100 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Input
Analog Sensitivity: 500 mV/
50 kilohms
S/N
(A, 500 mV
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
2)
3)
: 105 dB
4)
)
Output (Analog)
AUDIO OUT Voltage: 500 mV/1 kilohm
SUBWOOFER Voltage: 2 V/1 kilohm
Equalizer
Gain levels ±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range 87.5 MHz – 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
AM tuner section
Tuning range
Area Tuning scale
10 kHz step
USA, Canada 530 kHz –
1,710 kHz
Antenna (aerial) Loop antenna (aerial)
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
B
P
R
80 MHz HD Pass Through
9 kHz step
531 kHz –
1,710 kHz
: 0.7 Vp-p, 75 ohms
: 0.7 Vp-p, 75 ohms
continued
US
133