Sony STR-DN1030 Quick Setup Manual page 12

4
12
Now perform Auto Calibration.
1 Press MENU.
Press / repeatedly to select "Settings", then
2
or .
press
Press / repeatedly to select "Auto Cal.", then
3
or .
press
Press / repeatedly to select "Start", then
4
press .
5 Press to select "START".
The measurement starts in five seconds.
The measurement process will take
approximately 30 seconds with a test tone.
When the measurement ends, a beep sounds
and the screen switches.
Note
If a code appears on the screen, see the opposite
page to fix the problem.
Press / repeatedly to select "Save", then
6
press .
7 Disconnect the optimizer microphone from
the AV receiver.
///,
MENU