Quickly Saving A Job (Quick File) - Sharp MX-M503U Quick Start Manual

QUICKLY SAVING A JOB (Quick File)

As an example, the procedure for using "Quick File" while copying is explained below.
Quick File is the easiest way to save a file using the document filing function.
The side to be scanned must be face up!
Ready to scan for copy.
Job Detail
Settings
Auto
Exposure
1.
2.
100%
3.
Copy Ratio 4.
Scanned data is automatically stored
in the quick file folder. Do not store
confidential data to the folder.
90
0
A4 2-Sided Copy
Original
Output
Plain
A4
Special Modes
A4
A4R File
B4
A3
Quick File
(1)
OK
(2)
1
Place the originals.
When using the document glass, place the
original with the side to be scanned face down.
2
Select settings in the touch panel.
Select settings in the same way as when
making a regular copy.
(1) Touch the [Quick File] key.
(2) Touch the [OK] key.
3
Set the number of copies and then
press the [START] key.
The file is stored on the hard drive at the same
time as the copy is made.
Correct sets Cancel scanning Cancel copying