Interior Lamp; Garment; My Cycle - Samsung WF461ABW User Manual

Pausing the Child Lock function
When the door is locked or the buttons are locked by the Child Lock function, you can pause
the Child Lock operation for 1 minute by pressing and holding both the Soil Level and Signal
buttons simultaneously for approximately 3 seconds.
• If you pause the Child Lock mode temporarily, the door lock is released for 1 minute for user
convenience. During this period, the "Child Lock [
• If you open the door after the minute is over, an alarm sounds for up to 2 minutes.
• If you close the door within the 2 minutes, the door is locked and the Child Lock function is reactivated.
If you close the door after the 2 minutes, the door is not locked automatically and no alarm sounds.
Deactivating the Child Lock function
Press and hold both the Spin and Soil Level buttons simultaneously for approximately 6 seconds.
• When you deactivate the Child Lock function, the door is unlocked and the "Child Lock [
is turned off.
• The Child Lock function prevents children or the infi rm from accidently operating the
WARNING
• If a child enters the washing machine, the child may become trapped and suffocate.
• Once you have activated the Child Lock function, it continues working even if the power
• Opening the door by force can result in injury due to damage to the product.
To add laundry after you have activated the Child Lock function, you must fi rst pause or
deactivate the Child Lock function.
CAUTION
If you want to open the door of the washing machine when the Child Lock function is activated:
• Pause or deactivate the Child Lock function.
• Turn the washing machine off and then on again.

Interior Lamp

1. If the door is opened when the power is on, the Interior Lamp is automatically turned on.
2. If the door is closed when the power is on, the Interior Lamp is automatically turned off.
3. Press the Temp and the Spin buttons simultaneously when the power is on to turn the
Interior Lamp on or off.
4. If 5 minutes have passed after the Interior Lamp is turned on, the Interior Lamp is
automatically turned off.

Garment+

You can add or take out laundry items even after the wash has started, as long as the
"Garment+" light is on. Pushing the Start/Pause button unlocks the door, unless the water is
too hot or if there is too much water in your washer. If you are able to unlock the door and wish
to continue the wash cycle, close the door, and then press the Start/Pause button.

My cycle

Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button
convenience. By pushing the My Cycle button, you activate the settings used during the My
Cycle mode. The "My Cycle" light goes on, indicating activation. You can select all options as
follows in "My Cycle" mode.
1. Select the cycle using the Cycle Selector dial.
2. After cycle selection, set each option.
See page 32 for available option settings with each cycle.
3. Start "My Cycle" by pushing the Start/Pause button in "My Cycle" mode.
The washer will display the cycle and options you selected the next time you choose "My Cycle".
You can change the "My Cycle" settings by repeating the same process above.
The washer displays the last settings used the next time you choose "My Cycle".
To program "My Cycle" settings into your washer, the washer needs to complete an entire
wash cycle. If for any reason the wash cycle is interrupted and the washer does not finish
the cycle, it will not program in the settings for later use.
WF431ABP-03016A-07_EN_v1.indd Sec11:19 WF431ABP-03016A-07_EN_v1.indd Sec11:19
washer and injuring themselves.
is turned off.
]" lamp blinks.
Washing a load of laundry _19
]"
2012-05-09 2012-05-09 2:17:25 2:17:25