Override; Dr-Ready Operations And Display Method - Samsung WF461ABW User Manual

washing a load of laundry

Override

This is the function that can operate the unit regardless of the DR level.
Setting/Releasing
To turn the Override function on or off, press and hold bo¬th the Temp and Time buttons for 3 seconds.
How to Set:
1. The Override function can be turned on or off when the power is on.
2. The Override function setting is reset when the cycle is complete or the power is turned off.

DR-Ready Operations and Display Method

Operations according to the DR Level
DR Level
DR level 0
DR level 1
DR level 2
DR level 3
DR level 4
Override
• The Override function can be set to on or off when the power is on (when the button is
pressed and held for 3 seconds).
• The Override function setting is reset when the cycle is complete or the power is turned off.
• The Start/Pause key is ignored when the unit is in a paused DR state.
• If the Override function is activated when the unit is in a paused DR state, the cycle starts.
• The standby time in DR levels 2 and 3 is reset if the state changes to levels 0, 1 or Override.
Display for each DR level
DR Level
DR level 0 Cycle time (the same as normal mode.)
DR level 1 L1  Cycle time (the display is toggled at 5 second intervals.)
DR level 2 L2  Cycle time (the display is toggled at 5 second intervals.)
DR level 3 L3  Cycle time (the display is toggled at 5 second intervals.)
DR level 4 L4  Cycle time (the display is toggled at 5 second intervals.)
Override
• When the power is off or an error has occurred, the DR level is not displayed.
• If the cycle is completed (when 'End' is displayed), the DR level is not displayed.
Instantaneous Power Notification Function
If the Gateway requests Instantaneous Power, this function calculates and sends the current
Instantaneous Power.
20_ Washing a load of laundry
WF431ABP-03016A-07_EN_v1.indd Sec11:20 WF431ABP-03016A-07_EN_v1.indd Sec11:20
Operation
N/A
N/A
Start Delay: Up to 3 hours
or the user-configured
period of time.
Power consumption
limitation: Up to 10
minutes. At least 50%
N/A
Display
OR  Cycle time (the display is toggled at 5 second intervals.)
• When the Override function is turned on by pressing the
keys while the power is on.)
washer Dryer
Normal operation Normal operation
Normal operation Normal operation
1) Heater is turned off.
1) Switches to the pause
2) Normal operation
state.
except for the heater
1) Switches to the pause 1) Switches to the pause
state. state.
1) Switches to the pause 1) Switches to the pause
state. state.
Normal operation Normal operation
regardless of the DR level. regardless of the DR level.
DR Level Display
N/A
2012-05-09 2012-05-09 2:17:25 2:17:25