Using The Tv's Controller (Panel Key) - Samsung PN64E8000GF Quick Manual

The TV's Controller, a small joy stick like button on the bottom left side of the TV, lets you control the TV
without the remote control.
The product color and shape may vary depending on the model.
✎
Down (Front)
Left Right
TV Controller
Up (Rear)
Follow these instructions facing the front of your TV.
✎
When selecting the function by moving the controller to the up/down/left/right directions, be sure
✎
not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right
directions.
When you use a TV camera, you should check whether a tape attached or not in rear of the TV
✎
camera, and then you can use a TV camera after adjust a camera angle. When you don't want to
use a TV camera, we recommend to use after a camera lens fixes to upwards. In this case, Face
recognition and Motion Control are not available.
Power on
Adjusting the volume
Selecting a channel
Using the Function menu
Selecting the SMART HUB (™)

Using the TV's Controller (Panel Key)

Function menu
m R
P
Remote control sensor
When you use the Smart Touch Control,
a standby LED does not work (except
button).
P
Turn the TV on by pressing the Controller when the TV is in standby
mode.
Adjust the volume by moving the Controller from side to side when
the power is on.
Select a channel by moving the Controller backwards and forwards
when the power is on.
To view and use the Function menu, press and release the Controller
when the power is on. To close the Function menu, press and release
the Controller again.
With the Function menu visible, select SMART HUB (™) by moving
the Controller backwards. The SMART HUB main screen appears.
Select an application by moving the Controller, and then pressing the
Controller.
English - 12
Camera