Using The Tv's Controller (Panel Key); Selecting The Sources - Samsung 6+ Series User Manual

TV Controller is a multi directional button that helps navigate without remote control.
Some functions which require a PIN code may not be available.
✎
The product colour and shape may vary depending on the model.
✎
The TV's Controller, a small joy stick like button on the bottom left side of the TV, lets you control the
✎
TV without the remote control.
Remote control sensor
Follow these instructions facing the front of your TV.
✎
When selecting the function by moving the controller to the forwards/backwards/left/right directions,
✎
be sure not to press the controller. If you press it first, you cannot operate it to move the forwards/
backwards/left/right directions.
Power on
Adjusting the volume
Selecting a channel
Using the function menu
Selecting the MENU (m)
Selecting the SMART HUB
(™)
Selecting the Source (s)
Power off (P)
To close the Menu, Smart Hub, or Source, press the Controller for more than 1 second.
✎
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric
power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long
periods of time (when you are away on vacation, for example). It is best to unplug the power cord.
[PE6500-XU]BN68-04092J-01ENG.indb 7

Using the TV's Controller (Panel Key)

Function menu
m R
P
Down (Front)
Left
Up (Rear)
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusts the volume by moving the controller from side to side when the
power is on.
Select a channel by moving the Controller backwards and forwards when
the power is on.
To view and use the Function menu, press and release the Controller
when the power is on. To close the Function menu, press and release the
Controller again.
With the Function menu visible, select the MENU (m) by moving the
Controller to the left. The OSD (On Screen Display) Menu appears. Select
an option by moving the Controller to the right. Move the Controller to the
right or left, or backwards and forwards to make additional selections. To
change a parameter, select the it, and then press the Controller.
With the Function menu visible, select SMART HUB (™) by moving the
Controller backwards. The SMART HUB main screen appears. Select an
application by moving the Controller, and then pressing the Controller.
With the Function menu visible, open the Source (s) by pushing the
Controller to the right. The Source screen appears. To select a Source,
move the Controller back and forth. When the source you want is
highlighted, press the Controller.
With the Function menu visible, select Power off (P) by pulling the
Controller forwards, and then press the Controller.
Right
TV Controller
English - 7
2012-09-06 1:58:31