Washing A Load Of Laundry; Washing For The First Time; Basic Instructions - Samsung WF1704WSE2/XEU User Manual

washing a load of laundry

With your new Samsung washing machine, the hardest part of doing laundry will be
deciding which load to wash fi rst.

WASHING FOR THE FIRST TIME

Before washing laundry for the fi rst time, you must run a complete empty cycle (i.e. no laundry).
1. Press the Power button.
2. Add a little detergent to the detergent compartment
the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
This will remove any water that might be left over in the
machine from the manufacturer's test run.
Compartment
Compartment
Compartment

BASIC INSTRUCTIONS

1. Load your laundry into the washing machine.
Do not overload the washing machine. To determine the load capacity for each type of
laundry, refer to the chart on page 29.
WARNING
• Make sure that laundry is not caught in the door, as this may cause a water leak.
• Washing detergent may remain in the front rubber part of the washer after a wash cycle.
• Do not wash water-proofed items.
2. Close the door until it latches.
3. Turn the power on.
4. Add detergent and additives to the dispenser drawer.
5. Select the appropriate cycle and options for the load.
The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.
6. Press the Start/Pause button.
WF1704WS-03042W_EN-01.indd Sec5:21 WF1704WS-03042W_EN-01.indd Sec5:21
: Detergent for prewash, or starch.
: Detergent for the main wash, water softener, pre-soaking agent, bleach and
stain removal product.
: Additives, e.g. fabric softener or former (fi ll no higher than lower edge (MAX)
of "A")
Remove any remaining detergent, as they may cause a water leak.
in
washing a load of laundry _21
2012-04-16 2012-04-16 2:27:45 2:27:45