Meeting Installation Requirements; Electrical Supply And Grounding; Water Supply - Samsung WF1704WSE2/XEU User Manual

setting up your washing
machine

MEETING INSTALLATION REQUIREMENTS

Electrical supply and grounding

To prevent unnecessary risk of fi re, electrical shock, or personal injury, all wiring and grounding
must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest
Revision and local codes and ordinances. It is the personal responsibility of the appliance owner
to provide adequate electrical service for this appliance.
Never use an extension cord.
Use only the power cord that comes with your washing machine.
WARNING
When preparing for installation, ensure that your power supply offers:
• AC 220-240 V / 50 Hz fuse or circuit breaker
• Individual branch circuit serving only your washing machine
Your washing machine must be grounded. If your washing machine malfunctions or breaks
down, grounding will reduce the risk of electric shock by providing a path of least resistance for
the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in
a properly installed and grounded outlet.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result electrical shock.
Check with a qualifi ed electrician or serviceman if you are unsure if the washing machine is
properly grounded. Do not modify the plug provided with the washing machine. If it does not fi t
the outlet, have a proper outlet installed by a qualifi ed electrician.

Water Supply

Your washing machine will fi ll properly when your water pressure is 50 kPa ~ 800 kPa. Water
pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut
off completely. Or, it may take the washing machine longer to fi ll than what the controls allow,
resulting in your washing machine turning off. (A fi ll-time limit, designed to prevent overfl ows/
fl ooding if an internal hose becomes loose, is built into the controls.)
The water taps must be within 4 feet (122 cm) of the back of your washing machine for the
provided inlet hoses provided to reach your washing machine.
Most plumbing supply stores sell inlet hoses of various lengths up to 10 feet (305 cm) long.
You can reduce the risk of leaks and water damage by:
• Making water taps easily accessible.
• Turning off taps when the washing machine is not in use.
• Periodically checking for leaks at water inlet hose fi ttings.
Before using your washing machine for the fi rst time, check all connections at the water
valve and taps for leaks.
WARNING
14_ setting up your new washing machine
WF1704WS-03042W_EN-01.indd Sec4:14 WF1704WS-03042W_EN-01.indd Sec4:14 2012-04-16 2012-04-16 2:27:40 2:27:40