Get Started; Connect The Surge Protector - Philips SPP1028A/17 User Manual

3 Get started

This surge protector is designed to guard the
connected equipment against electrical damage.
Philips offers an entire line of surge protectors
to safeguard your home electronics and
computer systems.

Connect the surge protector

1
Lift up the flat pins of AC plug till you hear
a click.
2
Plug the surge protector into a properly
grounded outlet.
» The [PROTECTED] indicator light is
on.
3
Plug the power cord of devices into the
AC outlets of surge protector.
» The connected devices are protected
by the surge protector.
Caution
• If the [PROTECTED] indicator light is off when you plug in
the surge protector, the unit should be replaced.
•
Do not use any extension cords, adapters, other grounding
wire or electrical connections with your surge protector.
Doing so will void all Philips warranties.
Disconnect the surge
protector
1
Unplug the surge protector from grounded
outlet.
2
Put down the round pin to hide the AC
plug.
EN
5