Get Started - Philips SPP4069A/17 User Manual

3 Get started

This surge protector is designed to guard the
connected equipment against electrical damage.
Philips offers an entire line of surge protectors
to safeguard your home electronics and
computer systems.
Connect the surge protector
1
Plug the power cord into a properly
grounded outlet.
2
Plug the power cord of device into surge
protector.
Caution
• Do not use any extension cords, adapters, other grounding
wire or electrical connections with your surge protector.
Doing so will void all Philips warranties.
Connect a USB device to
the surge protector for USB
charging
Note
•
The USB ports are for charging only and not protected
by the surge protector.
Some Philips surge protector models come with
USB ports. You can charge your smart phone or
other USB devices through the USB ports on
your surge protector.
1
Connect one end of a USB cable to the
USB port on the surge protector.
2
Connect another end of a USB cable to
the USB device.
Connect the surge protector
to a phone/fax/modem
Some Philips surge protector models come with
phone/fax/modem surge protection, Instead of
running a connection directly from your phone/
fax/modem to the wall jack, pass the connection
through the protected jacks on your surge
protector.
IN/OUT phone protection
1
Connect your phone/fax/modem line to
the input jack IN on the surge protector.
2
Connect one end of a phone cord into the
output jack OUT on the surge protector,
and the other end to the phone/fax/
modem jack of device.
Splitter phone line protection
If you have one telephone number for both
your modem and telephone, you can split the
incoming phone line into two outs:
1
Connect your phone/fax/modem line to
the input jack IN on the surge protector.
2
Connect one end of a phone cord into the
output jack OUT on the surge protector,
and the other end to the phone/fax/
modem jack of device.
EN
5