Get Started; Conditions For Damage Claims - Philips SPN7040 User Manual

3 Get started

This surge protector is designed to guard
the connected equipment against electrical
damage. Philips offers an entire line of
surge protectors to safeguard your home
electronics and computer systems.
Connect the surge
protector
1
Plug the power cord into a properly
grounded outlet.
2 Plug the component power cord into the
surge protector.
Caution
•
Do not use any extension cords, adapters,
other grounding wire or electrical connections
with your surge protector. Doing so will void all
Philips warranties.
Connect the surge
protector to a TV/
satellite/cable box
Some Philips surge protector models come
with coaxial cable surge protection. Instead
of running a connection directly from your
TV/VCR/DVD/satellite/cable box to the
wall jack, pass the connection through the
protected coaxial connections on your surge
protector.
1 Connect your incoming cable/
broadband line to the input coaxial
connector on the surge protector.
2
Connect one end of a coaxial cable to
the output coaxial connector on the
surge protector, and the other end of
to the input coaxial connector of the
device.
Coaxial cable IN
Conditions for damage
claims
• To claim damage under the connected •
equipment warranty as a result of coaxial
line transients, ensure the equipment is
properly connected to a Philips surge
protector which offers coaxial line
protection.
• If you fail to connect the coaxial cable
protection, your connected equipment
will not be covered by the connected
equipment warranty. Most TV/VCR/
DVD/satellite/cable box damage can be
prevented if you connect coaxial cable
protection carefully and properly.
Caution
•
The coaxial feature of this product could be
rendered inoperable if improperly installed.
Set Top Box
Coaxial cable OUT
EN
3