Get Started; Connect The Surge Protector - Philips SPP3038B/17 User Manual

3 Get started

This surge protector is designed to guard the
connected equipment against electrical damage.
Philips offers an entire line of surge protectors
to safeguard your home electronics and
computer systems.

Connect the surge protector

1
Remove the screw from the surge
protector.
2
Plug the surge protector into a properly
grounded outlet.
» The [PROTECTED] indicator light is
on.
3
Install the screw through the surge
protector. (Optional)
4
Plug the component power cord into the
surge protector.
» The connected device is protected.
Caution
• If the [PROTECTED] indicator light is off when you
plug in the surge protector, the unit should be replaced.
• Do not use any extension cords, adapters, other
grounding wire or electrical connections with your
surge protector. Doing so will void all Philips warranties.
EN
5