Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips MCM108DB/37B Owner's Manual

Basic Functions

SOURCE BAND
STANDBY-ON
IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

●
In Active standby, or Eco standby, press
STANDBY-ON (y on the remote control).
➜
The system will switch to the last selected
source.
●
Press SOURCE (CD, TUNER or DOCK on
the remote control).
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY -ON (y on the remote
control).
➜
The clock is displayed.
To switch the system to Eco-power
standby mode
●
Press and hold STANDBY-ON (y on the
remote control) for more than 2 seconds.
➜
The clock is displayed.

Power-saving automatic standby

The power-saving feature automatically switches
to Eco power standby 15 minutes after a CD
playback has ended and no control is operated.
Note:
– In the Eco power standby, no button, except
SOURCE, and STANDBY -ON buttons, can
be activated.
14
- +
PROG/CLOCK VOLUME TUNING

Adjusting volume and sound

1
Press VOLUME – /
volume.
➜
Display shows the volume level
number from 0-32.
2
Press DSC repeatedly to
select the desired sound effect:
JAZZ / POP / CLASSIC /
ROCK.
3
Press DBB (on the remote control) to switch
bass enhancement on or off.
➜
Display shows:
DBB
4
Press MUTE on the remote control to stop
sound play-back instantly.
➜
Playback will continue without sound and the
display shows MUTE .
●
To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
+
to increase or decrease
and a
VOLUME
DBB DSC
if the DBB is activated.