Making/Answering Calls Using The Handset; Making Cellular Calls; Making Landline Calls - Panasonic KX-TG7733S Operating Instructions Manual

Making/Answering Calls Using the Handset

Making cellular calls

Important:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the CELL
1 or CELL 2 indicator lights green (page 16).
1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is registered.
– a specific line is set to make cellular
calls (page 20).
Go to step 4.
3
MbN: Select the desired cellular phone. a
MSELECTN
4
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R To switch to the speaker, press M N.
To switch back to the receiver, press M N/
M N.
Adjusting the receiver or speaker
volume
Press MjN or MkN repeatedly while talking.
Note:
R There are 5 volume levels (1 to 5) for the
receiver. When you change the receiver
volume to level 5 (maximum level), the
volume returns to level 4 (default) after you
hang up.
Making a cellular call using the redial
list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is registered.
For assistance, please visit http://www.panasonic.com/help
22
– a specific line is set to make cellular
calls (page 20).
4
MbN: Select the desired cellular phone. a
MSELECTN
Erasing a number in the redial list
1
M N REDIAL
2
MbN: Select the desired phone number.
a MERASEN
3
MbN: "Yes" a MSELECTN
4
MOFFN

Making landline calls

1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
M N
3
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press M N.
R Speak alternately with the other party.
2
When you finish talking, press MOFFN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press M N/
M N.
Making a call using the redial list
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
M N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number