Remote Commands; Using The Answering System; Turning On The Answering System - Panasonic KX-TG4734B Operating Instructions Manual

Answering System
Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
1
MMENUN#306
2
Enter the desired 3-digit remote access
code.
3
MSAVEN a MOFFN
Deactivating remote operation
Press * in step 2 on "Remote access code",
page 37.
R The entered remote access code is deleted.

Using the answering system

remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts, enter
your remote access code.
3
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 38).
4
When finished, hang up.
Voice guidance
n When the English voice guidance is
selected
During remote operation, the unit's voice
guidance starts and prompts you to press
1 to perform a specific operation, or
press 2 to listen to more available
operations.
n When the Spanish voice guidance is
selected
To start the voice guidance, press 9. The
voice guidance announces the available
remote commands (page 38).
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
For assistance, please visit http://www.panasonic.com/help
38

Remote commands

You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key Operation
1 Repeat message (during
*1
playback)
2 Skip message (during playback)
4 Play new messages
5 Play all messages
9
Stop playback
Start voice guidance
0 Turn answering system off
*4 Erase currently playing message
*5 Erase all messages
*# End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 For English voice guidance only
*3 For Spanish voice guidance only

Turning on the answering system

remotely
If the answering system is off, you can turn it
on remotely.
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
R A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 37).
*2
*3