Remote Operation; Remote Commands - Panasonic KX-TGC210C Operating Instructions Manual

Answering System
Key Operation
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN: "Playback" a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: "Erase" a
MSELECTN a MbN: "Yes" a MSELECTN
Calling back (Call Display
subscribers only)
1
Press MPAUSEN during playback.
2
MbN: "Call back" a MSELECTN
n Editing the number before calling back
1
Press MPAUSEN during playback.
2
MbN: "Edit & Call" a MSELECTN
3
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 28). a M
Erasing all messages
1
MMENUN#325
2
MbN: "Yes" a MSELECTN a MOFFN

Remote operation

Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit's voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is "111".
For assistance, visit www.panasonic.ca/english/support
32
TGC2xxC_(en_en)_0413_ver120.pdf 32
Important:
R To prevent unauthorized access to this
1
2
3
Deactivating remote operation
Press * in step 2 on "Remote access code",
page 32.
R The entered remote access code is deleted.
Using the answering system
remotely
1
2
3
N
4
Voice guidance
During remote operation, the unit's voice
guidance starts and prompts you to press 1
to perform a specific operation, or press 2 to
listen to more available operations.
Note:
R If you do not press any dial keys within 10

Remote commands

You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
product, we recommend that you regularly
change the remote code.
MMENUN#306
Enter the desired 3-digit remote access
code.
MSAVEN a MOFFN
Dial your phone number from a
touch-tone phone.
After the greeting message starts, enter
your remote access code.
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 32).
When finished, hang up.
seconds after a voice guidance prompt, the
unit disconnects your call.
Key Operation
1 Repeat message (during
*1
playback)
2015/04/13 11:54:43