Panasonic FV-10VSL2 Supplementary Installation Instructions page 3

GENERAL SAFETY INFORMATION CONTINUED
CAUTION:
1. Do not install this ventilating fan where interior room temperature may exceed 104 F (40 C).
2. Make sure that the electric service supply voltage is AC 120V, 60 Hz.
3. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and the
Occupation Safety and Health Act (OSHA).
4. Always disconnect the power source before working on or near the fan, motor, light fixture or
junction box.
5. Protect the supply wiring from sharp edges, oil, grease, hot surfaces, chemicals or other objects.
6. Do not kink the supply wiring.
7. Provide make up air for proper ventilation.
8. For general ventilating use only. Do not use to exhaust hazardous or explosive materials and
vapors.
9. Do not install the unit where ducts are configured as shown in Fig. A.
Prohibition
10. Not for use in cooking area. (Fig. B)
UNPACKING
Unpack and carefully remove unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.
Prohibition
(Cooking area)
Do not install above or
inside this area
equipment
Prohibition
Fig. A
Floor
Cooking
Fig. B
Adaptor
Prohibition
3